| Working principle: | Single screw, progressive cavity |
| Pump body material: | Cast iron, Stainless steel 304 or 316 |
| Stator material: | NBR, FKM |
| Viscosity range: | 1-106cst |
| Max. medium temperature: | 80℃(NBR) / 100℃(FKM) |
| Flow rate: | 0.8 - 150m3 |
| Discharge pressure: | 0.5 - 1.2Mpa |
| Caliber: | 1" - 6" |
| Caliber connection type: | Flange |
| Seal: | Packing seal, Mechanical seal |
| Motor power: | 1.1 - 15KW |
| Motor specification: | 220/240/380/400/415/440v, 3phase, 50/60Hz, etc |
| Motor type: |
Continuously variable transmission motor, Variable frequency motor, Electromagnetic motor, Gearbox motor, Explosion proof motor |
| Main application | Slurry, Silt, etc |
| Customized service | Trolley, Variable speed, etc |
| Model |
Caliber (mm) |
Head (m) |
Pressure (MPa) |
Power (KW) |
Capacity (m3/h) |
Suction (m) |
Speed (r/min) |
| I- I B1(Inch) | 25 | 50 | 0.5 | 1.1 | 1.5 | 2 | 960 |
| 100 | 1 | 2.2 | |||||
| I- IB1.5(Inch) | 40 | 80 | 0.8 | 2.2 | 3.2 | 3 | |
| 120 | 1.2 | 4 | |||||
| I- IB2(Inch) | 50 | 80 | 0.8 | 3 | 5.6 | 3 | |
| 120 | 1.2 | 5.5 | |||||
| I- IB2.5(Inch) | 65 | 60 | 0.6 | 3 | 6.5 | 3 | |
| 120 | 1.2 | 7.5 | |||||
| I- IB3(Inch) | 80 | 60 | 0.6 | 5.5 | 12 | 3 | |
| 120 | 1.2 | 11 | |||||
| I- IB4(Inch) | 100 | 60 | 0.6 | 7.5 | 16 | 3 | |
| I- IB5(Inch) | 125 | 60 | 0.6 | 11 | 19 | 3 | |
| I- IB6(Inch) | 150 | 60 | 0.6 | 15 | 24 | 3 |