| Working principle: | Double gear |
| Pump body material: | Cast iron, stainless steel 304 or 316 |
| Viscosity range: | 1 - 60000 cst |
| Max. medium temperature: | 80℃ / 250℃ |
| Max. suction: | 5m |
| Flow rate: | 6.1 - 3626 L/min |
| Discharge pressure: | 0.4 - 1.0 Mpa |
| Caliber | 1/2" - 8" |
| Caliber connection type: | Thread, flange |
| Motor power: | 0.55 - 75KW |
| Motor specification: | 220-440V, 3phase, 50/60Hz, etc |
| Motor type: | Gearbox reducer, Frequency, EX |
| Main application | Oil, heavy oil, resin, paint, polymer, honey, food oil(SS) |
| Customized service | Insulation jacket, variable speed, high temperature type |
| Model |
Displacement (L/100rev) |
Viscosity (c.s.t) |
Speed (r/min) |
Capacity (L/min) |
Pressure (MPa) |
Caliber (mm) |
Suction (m) |
Shaft power (KW) |
Connection |
| NYP-0.78 | 0.78 | 600/2000 | 1390/910 | 6.8/6.1 | 0.6 | 15 | 5 | 0.27/0.31 | Thread |
| NYP-2.3 | 2.3 | 600/2000 | 1400/910 | 31.7/19.7 | 0.6 | 25 | 5 | 0.96/0.68 | Thread |
| NYP-3.6 | 3.6 | 600/2000 | 1450/960 | 49.3/33.7 | 0.8 | 40 | 5 | 1.77/1.54 | Flange |
| NYP-7.0 | 7.0 | 2000/6000 | 960/640 | 65/44 | 0.8 | 40 | 5 | 2.3/1.8 | Thread |
| NYP-24 | 24 | 2000/6000 | 475/357 | 110/83 | 0.8 | 50 | 5 | 2.9/2.6 | Flange |
| NYP-50 | 50 | 2000/6000 | 475/357 | 237-181 | 0.8 | 50 | 5 | 6.6/5.3 | Flange |
| NYP-80 | 80 | 2000/6000 | 417/305 | 319/326 | 0.8 | 80 | 5 | 8.9/7.5 | Flange |
| NYP-110 | 110 | 2000/6000 | 417/305 | 447/331 | 0.8 | 80 | 5 | 11.0/9.4 | Flange |
| NYP-160 | 160 | 2000/6000 | 355/319 | 552/500 | 0.8 | 100 | 5 | 13.0/13.5 | Flange |
| NYP-220 | 220 | 6000/20000 | 244/160 | 473/343 | 0.8 | 100 | 5 | 13.6/11.9 | Flange |
| NYP-320 | 320 | 20/60 | 430/430 | 1200/1225 | 1.0 | 125 | 5 | 26.0/26.5 | Flange |
| NYP-320 | 320 | 6000/20000 | 222/168 | 675/522 | 0.8 | 125 | 5 | 18.7/17.3 | Flange |
| NYP-440 | 440 | 20/60 | 360/360 | 1378/1401 | 1.0 | 150 | 5 | 29.8/27 | Flange |
| NYP-440 | 440 | 6000/20000 | 200/145 | 832/610 | 0.8 | 150 | 5 | 20.8/17.9 | Flange |
| NYP-650 | 650 | 20/60 | 315/315 | 1794/1832 | 0.8 | 125 | 5 | 33.0/33.2 | Flange |
| NYP-650 | 650 | 20000/60000 | 117/100 | 731/640 | 0.8 | 125 | 5 | 19.1/19.5 | Flange |
| NYP-730 | 730 | 20/60 | 315/315 | 1980/2026 | 0.8 | 150 | 5 | 37.3/37.3 | Flange |
| NYP-730 | 730 | 20000/60000 | 125/100 | 868/731 | 0.8 | 150 | 5 | 23.3/22.3 | Flange |
| NYP-1670 | 1670 | 20/60 | 250/250 | 3529/3626 | 0.8 | 200 | 5 | 66/68 | Flange |
| NYP-1670 | 1670 | 20000/60000 | 112/85 | 1790/1972 | 0.8 | 200 | 5 | 48.0/40.6 | Flange |